header

For Your Functional Ink & Coating Requirements

...Start Here

globeEL Panel and LED Lighting

Surface Resistivity: < .010 Ω/square/mil when fully dried

Applications:

  • Circuit and Electromechanical Assemblies
  • EL Panel and LED Lighting
  • Membrane switch
  • Touch screens
  • Printed Heaters
  • Other printed electronic applications

Features:

  • Screen printable
  • Fast drying
  • Extremely tough, scuff resistant and crease resistant
  • Ideal for long traces
  • Excellent adhesion to polyester, polyimide, ITO and most other substrates
  • Compatible with our UV curable dielectrics, all of our conductive epoxy adhesives and our UV curable component encapsulants and conformal coatings

Download the AG-500A data sheet.

Surface Resistivity: < .015 Ω/square /mill when fully dried

Applications:

  • Membrane switches
  • Additive circuits
  • Printed Heaters
  • PTF Circuits
  • Defibrillator pads
  • EKG/EEG Electrodes
  • Blood glucose sensors
  • EMI/RFI applications
  • EL panels

Features:

  • Screen print
  • Fast drying
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

Download the AG-510 data sheet.

Surface Resistivity: < 0.015 Ω/square/mil

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

Download the AG-800 data sheet.

Surface Resistivity: > 1 x 1014 Ω-cm

Applications:

  • Capacitance layer between phosphor and back electrodes for EL lamps on polyester or ITO substrates

Features:

  • Rigid thermaldielectric
  • Electrically insulating
  • Very moisture resistant
  • Produces mirror smooth surface finish

Download the BT-101 data sheet.

Applications

  • Touch Screens
  • Electroluminescent Lamps
  • Capacitive Touch Sensors
  • Membrane Switches

Features

  • Transparent
  • Screen printable
  • For use on flexible or rigid substrates
  • Replaces fragile ITO
  • Thermoformable
  • Compatible with most products in the Conductive Compounds product line.

Download the Clear Conductive Inks data sheet.

Surface Resistivity: 5.0 x 1015 Ω/square

Applications:

  • EL Panels (Electroluminescent)

Features:

  • Clear binder to custom mix with commercially available phosphor powder as needed
  • Excellent flexibility, toughness & resistance to water & oxygen
  • Outstanding adhesion to ITO surfaces
  • Use with our BT-101 Barium Titanate Dielectric

Download the PH-745 data sheet.

Surface Resistivity: @25°C 2.9 x 1013 Ω/square/mil

Applications:

  • Printed insulation layers for circuits
  • Touch screens
  • El panels
  • Flexible printed substrates

Features:

  • 100% solids
  • Adheres to difficult substrates such as ITO or other metal oxides
  • Screen print, dip, roll, knife over roll, and curtain coating

Download the UV-1006S data sheet.

Surface Resistivity: @25°C 3.8 x 1014 Ω/square/mil

Applications:

  • Component encapsulation
  • Wire or component staking

Features:

  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped

Download the UV-3010 data sheet.

Conductive Compounds Product Matrix