header

For Your Functional Ink & Coating Requirements

...Start Here

globeCircuit & Electromechanical Assemblies

Surface Resistivity: < .050 Ω/square/mil

Applications:

  • Circuit traces or jumper repair
  • Dip coating

Features:

  • Apply by syringe
  • Fast drying @ room or moderate temp
  • Thin for spray or dipping

Download the AG-610 data sheet.

Surface Resistivity: < 0.015 Ω/square/mil

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

Download the AG-800 data sheet.

Surface Resistivity: < 10,000 Ω/square/mil. Resistance values as low as 200Ω/sq. are possible with custom blends.

Applications:

  • Coating for paper, cardboard, wood and most plastic substrates
  • Saturant for urethane foam

Features:

  • Water based antistatic coating or saturant
  • Can be dipped, roll coated or sprayed
  • Can be crosslinked for increased hardness & durability

Download the Antistat-268 data sheet.

Surface Resistivity: < 15 Ω/square/mil

Applications:

  • Membrane switches
  • Overprint for silver conductive traces
  • Flex circuits
  • Additive circuits

Features:

  • Screen print, spray, dip or coat
  • Excellent adhesion to polyester & polyimide substrates
  • Not recommended on ITO
  • Can be blended with AG-800 for specific resistance values
  • Can be used as base electrode for EL panels

Download the C-220 data sheet.

Surface Resistivity: @25° < 50 Ω/square/mil

Applications

  • Membrane switches
  • Medical sensors
  • Heaters
  • Resistance pads
  • Overprint for silver conductive traces printed on polycarbonate substrate

Features

  • Screen printable
  • For use on polyester, polyimide and polycarbonate substrates
  • Excellent adhesion to most metal surfaces
  • Fast dry time in low temperature oven
  • Rheology can be adjusted

Download the C-774 data sheet.

Surface Resistivity: < 30 Ω/square/mil

Applications:

  • Coating for paper, cardboard, wood, metal and most plastic substrates
  • Saturant for urethane foam

Features:

  • More conductive version of Antistat-268
  • Rotogravure, spray, coat, dip
  • Water based antistatic coating or saturant

Download the C-808 data sheet.

Volume Resistivity: 1 x 1013 Ω-cm

Applications:

  • Potting thermocouples, thermistors and assemblies
  • Attaching components or assemblies to heat sinks

Features:

  • Two-part component epoxy adhesive
  • High thermal conductivity
  • Electrically insulating
  • High temperature and solvent resistant

Download the EP-452 data sheet.

Volume Resistivity: < 1.0 x 10-3 Ω-cm

Applications:

  • Component or wire attachment
  • Filling via holes or spacers

Features:

  • Two-part electrically conductive epoxy
  • Dot dispense, screen print or manual dispense
  • Low cure temperature
  • Fast curing
  • Suitable for flexible substrates
  • 6 month shelf life
  • Available in pre-measured CC-Paks, bulk or syringes

Download the EP-600 data sheet.

Volume Resistivity: < 1.0 x 1014 Ω-cm

Applications:

  • Potting components or assemblies
  • Protection against moisture
  • Protection against thermal or mechanical shock

Features:

  • Excellent moisture resistance
  • Excellent toughness and flexibility
  • Fast curing
  • Excellent mechanical properties and heat resistance

Download the EP-799 data sheet.

Volume Resistivity: < 1.0 x 10-3 Ω-cm

Applications:

  • Component attachment & termination on hybrid circuits, membrane switches & other assemblies

Features:

  • Two-part electrically conductive epoxy
  • For stencil printing processes
  • Low cure temperature
  • Excellent bond strength, temperature resistance and toughness
  • 6 month shelf life
  • Available in pre-measured CC-Paks, bulk or syringes

Download the EP-900 data sheet.

Volume Resistivity: < 5 x 10-4 Ω-cm

Applications:

  • Component attachment & termination on hybrid circuits, membrane switches & other assemblies

Features:

  • One-part epoxy
  • 30-day shelf life
  • Screen or stencil printing

Download the EP-1100 data sheet.

Surface Resistivity: 100 Ω/square/mil

Applications:

  • PTF circuits
  • Printed heater circuits
  • Printed rheostats
  • Flex circuits
  • Additive circuits

Features:

  • Thermoplastic
  • Used for higher temperatures
  • Tough, durable surface finish
  • Screen printable, especially for fine line/fine pitch
  • Excellent adhesion to polyester & polyimide surfaces
  • Can be blended with silver filled ink for specific resistance values

Download the HTC-300 data sheet.

Surface Resistivity: < 200 Ω/square/mil; dependent on x-link level

Applications:

  • PTF circuits
  • Printed heater circuits
  • Printed rheostats
  • Flex circuits
  • Additive circuits

Features:

  • Crosslinked thermoset for even more solvent resistance and higher temperature stability than HTC-300
  • Tough, durable surface finish
  • Screen printable, especially for fine line/fine pitch
  • Excellent adhesion to polyester & polyimide surfaces
  • Can be blended with silver filled ink for specific resistance values
  • Additional baking time required

Download the HTC-350 data sheet.

Surface Resistivity: @25°C 2.9 x 1013 Ω/square/mil

Applications:

  • Printed insulation layers for circuits
  • Touch screens
  • El panels
  • Flexible printed substrates

Features:

  • 100% solids
  • Adheres to difficult substrates such as ITO or other metal oxides
  • Screen print, dip, roll, knife over roll, and curtain coating

Download the UV-1006S data sheet.

Surface Resistivity: @25°C 5.0 x 1015 Ω/square

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Matte finish
  • Screen printable, dip, roll, knife over roll, curtain coating or die application
  • 100% solids
  • Available in clear translucent, blue or green colors
  • Low odor

Download the UV-2530 data sheet.

Surface Resistivity: @25°C 5.0 x 1015 Ω/square/mil

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Glossy finish
  • Screen print, dip, roll, knife over roll coating, curtain coating or die application
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

Download the UV-2531 data sheet.

Surface Resistivity: @25°C 3.8 x 1014 Ω/square/mil

Applications:

  • Component encapsulation
  • Wire or component staking

Features:

  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped

Download the UV-3010 data sheet.

Applications:

  • Rigid substrates such as FR-4, FR-3, ceramic, CEM-1, CEM-3 and other inorganic and organic material used for printed circuit assemblies
  • Potentiometers
  • Rheostats
  • Linear actuators
  • Wherever stable electrical resistance at higher temperatures is required

Features:

  • Variable Resistive carbon inks for blending to achieve specific resistance values
  • Electrically conductive
  • Screen printable
  • Outstanding abrasion resistance
  • Temperature resistant
  • Precise and stabile resistance over time

Download the VRI data sheet.

Surface Resistivity: < .025 Ω/square/mil

Applications:

  • RFID tags
  • Cell phone antennas
  • Medical EEG/EKG sensors
  • EMI/RFI shielding

Features:

  • Gravure or high speed processes
  • Suitable for spray, dipping, or coating
  • Low viscosity, high solids silver ink
  • Electrically conductive
  • Can be cross linked

Download the WB-1078 data sheet.

Conductive Compounds Product Matrix