Home        Contact us

RFID & Cell Phone Antennas

RFID


Click on a product below for info:

AG-800 Silver Conductive Ink
Surface Resistivity: <0.015 Ω/■

Applications:
• Flex circuits
• Membrane switches
• Additive circuits
• EMI/RFI applications
• Thermal targets

Features:
• Good conductivity
• High speed screen or pad printing
• Thin for spray or dipping
• Can blend with carbon to customize resistance
• Crease resistant

Click HERE to download the detailed AG-800 data sheet.
AG-755 Silver Conductive Ink
Surface Resistivity: <0.008 Ω/■

Applications:
• Flex circuits
• Membrane switches
• Additive circuits

Features:
• For fine line printing
• Screen printable
• Highest conductivity
• Higher viscosity, minimal slumping
• Excellent adhesion to metals
• Can be thinned for spray or dipping

Click HERE to download the detailed AG-755 data sheet.
AG-594 Silver Conductive Ink
Surface Resistivity: <0.018 Ω/■

Applications:
• Flex circuits
• RFID & cell phone antennas
• EEG/EKG/blood glucose disposable sensors
• Additive circuits
• EMI/RFI applications

Features:
• High speed gravure or flexo printing
• For extremely thin line printing
• Excellent edge definition
• Excellent adhesion to most metal surfaces as well as polyester, polyimide & polycarbonate films
• Can be thinned

Click HERE to download the detailed AG-594 data sheet.
WB-101 Water Based Silver Conductive Ink
Surface Resistivity: <0.025 Ω/■

Applications:
• RFID tags
• Cell phone antennas
• Medical EEG/EKG sensors
• EMI/RFI shielding

Features:
• Gravure or rotary printable
• Can be used to spray or coat
• Low viscosity
• High solids
• Excellent for very thin film traces
• Thermoplastic
• Can crosslink for harder surface & stronger durability
• Excellent adhesion to most substrates

Click HERE to download the detailed WB-101 data sheet.
C-200 Carbon Conductive Ink
Surface Resistivity: 50 Ω/■

Applications:
• Membrane switches
• Overprint for silver conductive traces
• Flex circuits
• Additive circuits

Features:
• Vinyl based thermoplastic
• Screen printable
• Excellent adhesion to polyester & polyimide substrates
• Not recommended on ITO
• Can be blended with AG-800 for specific resistance values
• Can be used as base electrode for EL panels

Click HERE to download the detailed C-200 data sheet.
C-774 Carbon Conductive Ink
Surface Resistivity: 30 Ω/■

Applications:
• Membrane switches
• Medical sensors
• Heaters
• Resistance pads
• Overprint for silver conductive traces printed on polycarbonate substrate

Features:
• Screen printable
• For use on polyester, polyimide and polycarbonate substrates
• Excellent adhesion to most metal surfaces
• Fast dry time in low temperature oven
• Rheology can be adjusted

Click HERE to download the detailed C-774 data sheet.
UV-2530 Matte Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• PTF circuits
• Flexible circuit substrates
• Printed insulation layers for circuits
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits &    membrane switches

Features:
• Matte finish
• Screen or pad printable
• 100% solids
• Available in clear translucent, blue or green colors
• Low odor

Click HERE to download the detailed UV-2530 data sheet.
UV-2531 Glossy Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• PTF circuits
• Flexible circuit substrates
• Printed insulation layers for circuits
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits &    membrane switches

Features:
• Glossy finish
• Screen or pad printable
• 100% solids
• Available in clear, blue or green colors
• Low odor

Click HERE to download the detailed UV-2531 data sheet.
UV-2534 Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits &    membrane switches
• Overprint layer for carbon/graphite shielding layers

Features:
• Glossy finish
• For difficult substrates, such as printed carbon inks
• 100% solids
• Screen printable
• Moisture resistant
• Available in clear, blue or green colors

Click HERE to download the detailed UV-2534 data sheet.
UV-3010 Conformal Coating/Encapsulant
Surface Resistivity: 3.8 x 1014 Ω/■

Applications:
• Component encapsulation
• Printed circuit board protection

Features:
• 100% solids
• Dot dispensable
• Moisture resistant
• Suitable for flexible substrates
• Can be sprayed or dipped

Click HERE to download the detailed UV-3010 data sheet.
EP-600 Two-part Silver Conductive Epoxy
Volume Resistivity: <1.0 x 10-3 Ω-cm

Applications:
• Component or wire attachment
• Filling via holes or spacers

Features:
• Two-part electrically conductive epoxy
• Dot dispensable
• Low cure temperature
• Fast curing
• Suitable for flexible substrates
• 6 month shelf life
• Available in pre-measured CC-Paks, bulk or syringes

Click HERE to download the detailed EP-600 data sheet.
EP-900 Two-part Silver Conductive Epoxy
Volume Resistivity: <1.0 x 10-3 Ω-cm

Applications:
• Component attachment & termination on hybrid circuits, membrane keypads & other assemblies

Features:
• Two-part electrically conductive epoxy
• For stencil printing processes
• Low cure temperature
• Excellent bond strength, temperature resistance and toughness
• 6 month shelf life
• Available in pre-measured CC-Paks, bulk or syringes

Click HERE to download the detailed EP-900 data sheet.
EP-1100 One-part Silver Conductive Epoxy
Volume Resistivity: <5.0 x 10-4 Ω-cm

Applications:
• Component attachment & termination on hybrid circuits, membrane keypads & other assemblies

Features:
• One part epoxy
• 30-day shelf life
• Screen or stencil printing

Click HERE to download the detailed EP-1100 data sheet.