Home        Contact us

Printed Heaters and Thermal Targets

Heaters


Click on a product below for info:

AG-800 Silver Conductive Ink
Surface Resistivity: <0.015 Ω/■

Applications:
• Flex circuits
• Membrane switches
• Additive circuits
• EMI/RFI applications
• Thermal targets

Features:
• Good conductivity
• High speed screen or pad printing
• Thin for spray or dipping
• Can blend with carbon to customize resistance
• Crease resistant

Click HERE to download the detailed AG-800 data sheet.
AG-500 Silver Conductive Ink
Surface Resistivity: 0.02 Ω/■

Applications:
• Used for EL panel bus bars on ITO
• Touch screen bus bars
• Difficult substrates
• Flex circuits
• Membrane switches
• EMI/RFI shielding

Features:
• Screen printable
• Wets out well and has better adhesion on ITO substrates
• High conductivity
• Thin for spray or dipping
• Can blend with carbon to customize resistance

Click HERE to download the detailed AG-500 data sheet.
AG-510 Silver Conductive Ink
Surface Resistivity: 0.015 Ω/■

Applications:
• Membrane switches
• Additive circuits
• Printed heaters
• PTF circuits
• Defibrillator pads
• EKG/EEG electrodes
• Blood glucose sensors
• EMI/RFI applications
• EL panels

Features:
• Polyester binder
• Screen or pad printable
• Fast drying
• High conductivity
• Thin for spray or dipping
• Can blend with carbon to customize resistance

Click HERE to download the detailed AG-510 data sheet.
C-200 Carbon Conductive Ink
Surface Resistivity: 50 Ω/■

Applications:
• Membrane switches
• Overprint for silver conductive traces
• Flex circuits
• Additive circuits

Features:
• Vinyl based thermoplastic
• Screen printable
• Excellent adhesion to polyester & polyimide substrates
• Not recommended on ITO
• Can be blended with AG-800 for specific resistance values
• Can be used as base electrode for EL panels

Click HERE to download the detailed C-200 data sheet.
HTC-300 High Temperature Carbon Ink
Surface Resistivity: 100 Ω/■

Applications:
• PTF circuits
• Printed heater circuits
• Printed rheostats
• Flex circuits
• Additive circuits

Features:
• Thermoplastic
• Used for higher temperatures
• Tough, durable surface finish
• Screen printable, especially for fine line/fine pitch
• Excellent adhesion to polyester & polyimide surfaces
• Can be blended with silver filled ink for specific resistance values

Click HERE to download the detailed HTC-300 data sheet.
HTC-350 High Temperature Carbon Ink
Surface Resistivity: 100 Ω/■

Applications:
• PTF circuits
• Printed heater circuits
• Printed rheostats
• Flex circuits
• Additive circuits

Features:
• Crosslinked thermoset for even more solvent resistance and higher temperature stability than HTC-300
• Tough, durable surface finish
• Screen printable, especially for fine line/fine pitch
• Excellent adhesion to polyester & polyimide surfaces
• Can be blended with silver filled ink for specific resistance values
• Additional baking time required

Click HERE to download the detailed HTC-350 data sheet.
PTC Heater Ink Series
See Data Sheet for Surface Resistivity

Applications:
• Self -regulating printed heater circuits

Features:
• Positive Thermal Coefficient Inks are self-regulating & powered with low DC voltage
• Operates in temperature range of 60-70oC without feedback loop
• Screen printable
• Print treated polyester or polyimide substrates
• AG-800 or AG-510 silver ink recommended for bus bar

Click HERE to download the detailed PTC Series data sheet.
C-774 Carbon Conductive Ink
Surface Resistivity: 30 Ω/■

Applications:
• Membrane switches
• Medical sensors
• Heaters
• Resistance pads
• Overprint for silver conductive traces printed on polycarbonate substrate

Features:
• Screen printable
• For use on polyester, polyimide and polycarbonate substrates
• Excellent adhesion to most metal surfaces
• Fast dry time in low temperature oven
• Rheology can be adjusted

Click HERE to download the detailed C-774 data sheet.
UV-2530 Matte Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• PTF circuits
• Flexible circuit substrates
• Printed insulation layers for circuits
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits &    membrane switches

Features:
• Matte finish
• Screen or pad printable
• 100% solids
• Available in clear translucent, blue or green colors
• Low odor

Click HERE to download the detailed UV-2530 data sheet.
UV-2531 Glossy Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• PTF circuits
• Flexible circuit substrates
• Printed insulation layers for circuits
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits &    membrane switches

Features:
• Glossy finish
• Screen or pad printable
• 100% solids
• Available in clear, blue or green colors
• Low odor

Click HERE to download the detailed UV-2531 data sheet.
UV-2534 Glossy dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits &    membrane switches
• Overprint layer for carbon/graphite shielding layers

Features:
• Glossy finish
• For difficult substrates, such as printed carbon inks
• 100% solids
• Screen printable
• Moisture resistant
• Available in clear, blue or green colors

Click HERE to download the detailed UV-2534 data sheet.
UV-1006S Dielectric
Surface Resistivity: 2.9 x 1013 Ω/■

Applications:
• Printed insulation layers for circuits
• Touch screens
• EL panels
• Flexible printed substrates

Features:
• 100% solids
• Adheres to difficult substrates such as ITO or other metal oxides
• Screen or pad printable

Click HERE to download the detailed UV-1006S data sheet.