Home        Contact us

EL Panels & LED Lighting

EL Panels


Click on a product below for info:
AG-800 Silver Conductive Ink
Surface Resistivity: <0.015 Ω/■

Applications:
• Flex circuits
• Membrane switches
• Additive circuits
• EMI/RFI applications
• Thermal targets

Features:
• Good conductivity
• High speed screen or pad printing
• Thin for spray or dipping
• Can blend with carbon to customize resistance
• Crease resistant

Click HERE to download the detailed AG-800 data sheet.
AG-500 Silver Conductive Ink
Surface Resistivity: 0.02 Ω/■

Applications:
• Used for EL panels bus bars on ITO
• Touch screen bus bars
• Difficult substrates
• Flex circuits
• Membrane switches
• EMI/RFI shielding

Features:
• Screen printable
• Wets out well and has better adhesion on ITO substrates
• High conductivity
• Thin for spray or dipping
• Can blend with carbon to customize resistance

Click HERE to download the detailed AG-500 data sheet.
AG-510 Silver Conductive Ink
Surface Resistivity: 0.015 Ω/■

Applications:
• Membrane switches
• Additive circuits
• Printed heaters
• PTF circuits
• Defibrillator pads
• EKG/EEG electrodes
• Blood glucose sensors
• EMI/RFI applications
• EL panels

Features:
• Polyester binder
• Screen or pad printable
• Fast drying
• High conductivity
• Thin for spray or dipping
• Can blend with carbon to customize resistance

Click HERE to download the detailed AG-510 data sheet.
AG-530 Silver Conductive Ink
Surface Resistivity: 0.01 Ω/■

Applications:
• Touch screen bus bars
• Used for EL panels in ITO
• Additive circuits

Features:
• Extremely flexible
• Can blend with carbon to customize resistance
• Excellent adhesion to polyester, polyimide, ITO, most textiles & porous substrates

Click HERE to download the detailed AG-530 data sheet.
C-200 Carbon Conductive Ink
Surface Resistivity: 50 Ω/■

Applications:
• Membrane switches
• Overprint for silver conductive traces
• Flex circuits
• Additive circuits

Features:
• Vinyl based thermoplastic
• Screen printable
• Excellent adhesion to polyester & polyimide substrates
• Can be blended with AG-800 for specific resistance values
• Can be used as base electrode for EL panels

Click HERE to download the detailed C-200 data sheet.
C-774 Carbon Conductive Ink
Surface Resistivity: 30 Ω/■

Applications:
• Membrane switches
• Medical sensors
• Heaters
• Resistance pads
• Overprint for silver conductive traces printed on polycarbonate substrate

Features:
• Screen printable
• For use on polyester, polyimide and polycarbonate substrates
• Excellent adhesion to most metal surfaces
• Fast dry time in low temperature oven
• Rheology can be adjusted

Click HERE to download the detailed C-774 data sheet.
UV-3010 Conformal Coating/Encapsulant
Surface Resistivity: 3.8 x 1014 Ω/■

Applications:
• Component encapsulation
• Printed circuit board protection

Features:
• 100% solids
• Dot dispensable
• Moisture resistant
• Suitable for flexible substrates
• Can be sprayed or dipped

Click HERE to download the detailed UV-3010 data sheet.
UV-1006S Dielectric
Surface Resistivity: 2.9 x 1013 Ω/■

Applications:
• Printed insulation layers for circuits
• Touch screens
• EL panels
• Flexible printed substrates

Features:
• 100% solids
• Adheres to difficult substrates such as ITO or other metal oxides
• Screen or pad printable

Click HERE to download the detailed UV-1006S data sheet.
EP-600 Two-part Silver Conductive Epoxy
Volume Resistivity: <1.0 x 10-3 Ω-cm

Applications:
• Component or wire attachment
• Filling via holes or spacers

Features:
• Two-part electrically conductive epoxy
• Dot dispensable
• Low cure temperature
• Fast curing
• Suitable for flexible substrates
• 6 month shelf life
• Available in pre-measured CC-Paks, bulk or syringes

Click HERE to download the detailed EP-600 data sheet.
EP-900 Two-part Silver Stencil Epoxy
Volume Resistivity: <1.0 x 10-3 Ω-cm

Applications:
• Component attachment & termination on hybrid circuits, membrane keypads & other assemblies

Features:
• Two-part electrically conductive epoxy
• For stencil printing processes
• Low cure temperature
• Excellent bond strength, temperature resistance and toughness
• 6 month shelf life
• Available in pre-measured CC-Paks, bulk or syringes

Click HERE to download the detailed EP-900 data sheet.
EP-1100 One-part Silver Conductive Epoxy
Volume Resistivity: <5.0 x 10-4 Ω-cm

Applications:
• Component attachment & termination on hybrid circuits, membrane keypads & other assemblies

Features:
• One part epoxy
• 30-day shelf life
• Screen or stencil printing

Click HERE to download the detailed EP-1100 data sheet.
PH-745 Phosphor Binder
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• Mix with microencapsulated phosphor powder to produce pastes for EL panels

Features:
• Clear binder to custom mix with commercially available phosphor powder as needed
• Excellent flexibility, toughness & resistance to water & oxygen
• Outstanding adhesion to ITO surfaces

Click HERE to download the detailed PH-745 data sheet.
BT-101 Barium Titanate Dielectric
Volume Resistivity: >1 x 1014 Ω-cm

Applications:
• Capacitance layer between phosphor and back electrodes for EL lamps on polyester or ITO   substrates

Features:
• High dielectric constant
• Barium titanate based dielectric ink
• Electrically insulating
• Screen printable
• Very moisture resistant
• Can be crosslinked
• Produces mirror smooth surface finish

Click HERE to download the detailed BT-101 data sheet.