Home        Contact us

Circuit & Electro Mechanical Assemblies


Click on a product below for info:
AG-800 Silver Conductive Ink
Surface Resistivity: <0.015 Ω/■

Applications:
• Flex circuits
• Membrane switches
• Additive circuits
• EMI/RFI applications
• Thermal targets

Features:
• Good conductivity
• High speed screen or pad printing
• Thin for spray or dipping
• Can blend with carbon to customize resistance
• Crease resistant

Click HERE to download the detailed AG-800 data sheet.
AG-610 Silver Conductive Ink
Surface Resistivity: 0.050 Ω/■

Applications:
• Circuit traces or jumper repair
• High speed dip coating

Features:
• Apply by syringe
• Fast drying @ room or moderate temp
• Thin for spray or dipping

Click HERE to download the detailed AG-610 data sheet.
WB-101 Water Based Silver Conductive Ink
Surface Resistivity: <0.025 Ω/■

Applications:
• RFID tags
• Cell phone antennas
• Medical EEG/EKG sensors
• EMI/RFI shielding

Features:
• Gravure or rotary printable
• Can be used to spray or coat
• Low viscosity
• High solids
• Excellent for very thin film traces
• Thermoplastic
• Can crosslink for harder surface & stronger durability
• Excellent adhesion to most substrates

Click HERE to download the detailed WB-101 data sheet.
HTC-300 High Temperature Carbon Ink
Surface Resistivity: 100 Ω/■

Applications:
• PTF circuits
• Printed heater circuits
• Printed rheostats
• Flex circuits
• Additive circuits

Features:
• Thermoplastic
• Used for higher temperatures
• Tough, durable surface finish
• Screen printable, especially for fine line/fine pitch
• Excellent adhesion to polyester & polyimide surfaces
• Can be blended with silver filled ink for specific resistance values

Click HERE to download the detailed HTC-300 data sheet.
HTC-350 High Temperature Carbon Ink
Surface Resistivity: 100 Ω/■

Applications:
• PTF circuits
• Printed heater circuits
• Printed rheostats
• Flex circuits
• Additive circuits

Features:
• Crosslinked thermoset for even more solvent resistance and higher temperature stability than    HTC-300
• Tough, durable surface finish
• Screen printable, especially for fine line/fine pitch
• Excellent adhesion to polyester & polyimide surfaces
• Can be blended with silver filled ink for specific resistance values
• Additional baking time required

Click HERE to download the detailed HTC-350 data sheet.
C-220 Carbon Conductive Ink
Surface Resistivity: <10 Ω/■/mil

Applications:
• Membrane switches
• Overprint for silver conductive traces
• Flex circuits
• Additive circuits

Features:
• Vinyl based thermoplastic
• Screen printable
• Excellent adhesion to polyester & polyimide substrates
• Not recommended on ITO
• Can be blended with AG-800 for specific resistance values
• Can be used as base electrode for EL panels

Click HERE to download the detailed C-220 data sheet.
C-774 Carbon Conductive Ink
Surface Resistivity: 30 Ω/■

Applications:
• Membrane switches
• Medical sensors
• Heaters
• Resistance pads
• Overprint for silver conductive traces printed on polycarbonate substrate

Features:
• Screen printable
• For use on polyester, polyimide and polycarbonate substrates
• Excellent adhesion to most metal surfaces
• Fast dry time in low temperature oven
• Rheology can be adjusted

Click HERE to download the detailed C-774 data sheet.
VRI Variable Resistance Carbon Ink
Surface Resistivity: 1 to 100,000 Ω/■

Applications:
• Rigid substrates such as FR-4, FR-3, ceramic, CEM-1, CEM-3 and other inorganic and organic material   used for printed circuit assemblies
• Potentiometers
• Rheostats
• Linear actuators
• Wherever stable electrical resistance at higher temperatures is required

Features:
• Variable resistance carbon inks for blending to achieve specific resistance values
• Electrically conductive
• Screen printable
• Outstanding abrasion resistance
• Temperature resistant
• Precise and stabile resistance over time

Click HERE to download the detailed VRI data sheet.























UV-2530 Matte Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• PTF circuits
• Flexible circuit substrates
• Printed insulation layers for circuits
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane   switches

Features:
• Matte finish
• Screen or pad printable
• 100% solids
• Available in clear translucent, blue or green colors
• Low odor

Click HERE to download the detailed UV-2530 data sheet.

























UV-2531 Glossy Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• PTF circuits
• Flexible circuit substrates
• Printed insulation layers for circuits
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane   switches

Features:
• Glossy finish
• Screen or pad printable
• 100% solids
• Available in clear, blue or green colors
• Low odor

Click HERE to download the detailed UV-2531 data sheet.



























UV-2534 Glossy Dielectric
Surface Resistivity: 5.0 x 1015 Ω/■

Applications:
• Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane   switches
• Overprint layer for carbon/graphite shielding layers

Features:
• Glossy finish
• For difficult substrates, such as printed carbon inks
• 100% solids
• Screen printable
• Moisture resistant
• Available in clear, blue or green colors

Click HERE to download the detailed UV-2534 data sheet.






























UV-3010 Conformal Coating/Encapsulant
Surface Resistivity: 3.8 x 1014 Ω/■

Applications:
• Component encapsulation
• Printed circuit board protection

Features:
• 100% solids
• Dot dispensable
• Moisture resistant
• Suitable for flexible substrates
• Can be sprayed or dipped

Click HERE to download the detailed UV-3010 data sheet.


































UV-1006S Dielectric
Surface Resistivity: 2.9 x 1013 Ω/■

Applications:
• Printed insulation layers for circuits
• Touch screens
• EL panels
• Flexible printed substrates

Features:
• 100% solids
• Adheres to difficult substrates such as ITO or other metal oxides
• Screen or pad printable

Click HERE to download the detailed UV-1006S data sheet.




































EP-600 Two-part Silver Conductive Epoxy
Volume Resistivity: <1.0 x 10-3 Ω/-cm

Applications:
• Component or wire attachment
• Filling via holes or spacers

Features:
• Two-part electrically conductive epoxy
• Dot dispensable
• Low cure temperature
• Fast curing
• Suitable for flexible substrates
• 6 month shelf life
• Available in pre-measured CC-Paks, bulk or syringes

Click HERE to download the detailed EP-600 data sheet.







































EP-900 Two-part Silver Stencil Epoxy
Volume Resistivity: <1.0 x 10-3 Ω/-cm

Applications:
• Component attachment & termination on hybrid circuits, membrane keypads & other assemblies

Features:
• Two-part electrically conductive epoxy
• For stencil printing processes
• Low cure temperature
• Excellent bond strength, temperature resistance and toughness
• 6 month shelf life
• Available in pre-measured CC-Paks, bulk or syringes

Click HERE to download the detailed EP-900 data sheet.












































EP-1100 One-part Silver Conductive Epoxy
Volume Resistivity: <5.0 x 10-4 Ω/-cm

Applications:
• Component attachment & termination on hybrid circuits, membrane keypads & other assemblies

Features:
• One part epoxy
• 30-day shelf life
• Screen or stencil printing

Click HERE to download the detailed EP-1100 data sheet.














































Antistat-268 Conductive Carbon Coating
Surface Resistivity: <10,000 Ω/■

Applications:
• Coating for paper, cardboard, wood and most plastic substrates
• Saturant for urethane foam

Features:
• Water based antistatic coating or saturant
• Can be dipped, roll coated or sprayed
• Can be crosslinked for increased hardness & durability

Click HERE to download the detailed Antistat-268 data sheet.


















































C-808 Highly Conductive Carbon Coating
Surface Resistivity: <50 Ω/■

Applications:
• Coating for paper, cardboard, wood and most plastic substrates
• Saturant for urethane foam

Features:
• More conductive version of Antistat-268

Click HERE to download the detailed C-808 data sheet.
















































EP-837 Two-part Epoxy Staking Adhesive
Volume Resistivity: 1 x 1014 Ω/-cm

Applications:
• Staking or anchoring components or wires
• Encapsulating components

Features:
• Low viscosity, 100% solids
• Non-conductive
• Dot dispensable
• Available in clear or green color
• Low temperature, fast curing

Click HERE to download the detailed EP-837 data sheet.
















































EP-452 Two-part Thermally Conductive Adhesive/Potting Compound
Volume Resistivity: 1 x 1013 Ω/-cm

Applications:
• Potting thermocouples, thermistors and assemblies
• Attaching components or assemblies to heat sinks

Features:
• Two part component epoxy adhesive
• High thermal conductivity
• Electrically insulating
• High temperature and solvent resistant

Click HERE to download the detailed EP-452 data sheet.
















































EP-799 Two-part General Purpose Epoxy Potting Material
Volume Resistivity: 1.0 x 1014 Ω/-cm

Applications:
• Potting components or assemblies
• Protection against moisture
• Protection against thermal or mechanical shock

Features:
• Excellent moisture resistance
• Excellent toughness and flexibility
• Fast curing
• Excellent mechanical properties and heat resistance

Click HERE to download the detailed EP-799 data sheet.